Search

Search Results

• Another Six-Node Triangular Element for Structural Analysis

  Lan HOANG THAT TON

  2022-08-01

  221–238
• Nonlinear Finite Element Simulation of Friction Stir Processing of Marine Grade 5083 Aluminum Alloy

  Emad Eldin KISHTA, Farid ABED, Basil DARRAS

  2014-11-06

  313–328
• Evaluation of Partial Factorization for Reduction of Finite Element Matrices

  Pawel JARZĘBSKI, Krzysztof WIŚNIEWSKI

  2017-03-20

  163–170
• Calculation of the Dispersion Curves Modeling the Propagation of Ultrasonic Lamb Waves in a Bonded Aluminum/Epoxy/Aluminum Structure Using the Semi-Analytical Finite Element Method

  Mustapha AZKOUR, Mhammed EL ALLAMI, Hassan RHIMINI

  2024-03-19

  119–143
• Some Reliability Issues of the Corrugated I-Beam Girder

  Damian SOKOŁOWSKI, Marcin Marek KAMIŃSKI

  2015-01-15

  297–315
• Two-Phase Isotropic Composites of Extremal Moduli. The Inverse Homogenization Problem

  Tomasz ŁUKASIAK

  2017-03-20

  31–38
• Characteristics of Vibrating Composite Stiffened Hypars with Cut-Out at Different Modes

  Sarmila SAHOO

  2019-02-14

  75–99
• Numerical Elastoplastic Analysis of Trabeculae in Lumbar Vertebral Body

  Algirdas MAKNICKAS, Vidmantas ALEKNA, Oleg ARDATOV, Natalya KIZILOVA, Marija TAMULAITIENĖ, Rimantas KAČIANAUSKAS

  2017-03-20

  83–88
• Transfer Effects on an Unsteady MHD Mixed Convective Flow Past a Vertical Plate with Chemical Reaction

  R. Srinivasa RAJU

  2017-06-26

  221–249
• Unbalanced Response Analysis and Experiment of Magnetic Levitation Rotor Based on the State-Space Method

  Shuyue ZHANG, Yahu ZHANG, Xiaolian LV, Songling JIN

  2024-09-17

  343–363
• Modelling of Damping Properties of Articular Cartilage During Impact Load

  Tomasz KLEKIEL, Jarosław WODZISŁAWSKI, Romuald BĘDZIŃSKI

  2017-03-20

  133–145
• Identification of Johnson-Cook Equation Constants using Finite Element Method

  Michał GRĄZKA, Jacek JANISZEWSKI

  215–223
• Lightweighting of Wishbone Finite Element Analysis

  Shuxian WANG, Perk Lin CHONG, David HUGHES

  2020-02-11

  103–114
• Frequency-Based Crack Effect Study on Beams Under Free Vibration Using Finite Element Analysis

  Ompriya SAHU, Priyadarshi DAS, Manoj Kumar MUNI, Nibedita PRADHAN, Bidyadhar BASA, Shishir Kumar SAHU

  2024-01-31

  95–114
• Strength Estimation of Teeth Reinforced with Different Types of Post Systems

  Wojciech RYNIEWICZ, Anna Maria RYNIEWICZ, Tomasz MADEJ, Grażyna WIŚNIEWSKA

  2017-03-20

  147–154
• Numerical Analysis of the Damage Evolution in a Composite Pipe Joint Under Cyclic Static Axial Tension

  Ł. Figiel, M. Kamiński

  2003-12-30

  363–379
• Validation of a New Hyperviscoelastic Model for Deformable Polymers Used for Joints between RC Frames and Masonry Infills

  Arkadiusz KWIECIEŃ, Matija GAMS, Theodoros ROUSAKIS, Alberto VISKOVIC, Jože KORELC

  2017-03-20

  113–121
• Contact with Friction Between 3D Beams with Deformable Circular Cross Sections

  Olga KAWA, Przemyslaw LITEWKA

  2015-10-27

  439-462
• Numerical Modeling of Delamination in GFRP Composites

  M. R. KHOSHRAVAN, A. YOURDKHANI

  61–77
• Numerical analysis of the effect of torispherical head on the buckling of pressure vessel

  M. R. KHOSHRAVAN, A. RAHMANI

  71–87
• Experimental and Theoretical Study on Screwed Connections in Cold-Formed Steel Structure

  Rattanasak HONGTHONG, Apai BENCHAPHONG, Sutera BENCHANUKROM, Nirut KONKONG

  2019-11-19

  557–577
• Numerical Study for Optimal Design of Geosynthetic Reinforced Soil (GRS) Walls

  Rashid Hajivand DASTGERDI, Nima BAHRAMI, Kamran KAZEMI, Muhammad Faisal WAQAR, Agnieszka MALINOWSKA

  2024-01-17

  3–14
• On the Machine Tool Substitutive Model Creation, Supported by the Finite Element Method

  K.J. Kaliński, T. Kucharski

  221–245
• The Dynamic Stability Problem of Composite Annular Plates with Auxetic Properties

  Dorota PAWLUS

  2023-08-02

  329–349
• Influence of Polymer Flexible Joint on Concrete Beams in Three-Point Bending Test

  Łukasz ZDANOWICZ, Arkadiusz KWIECIEŃ

  2015-09-30

  397-406
• Wavelet Analysis of Ultrasonic Lamb Wave Displacements in Three-Layer Adhesive Plates: Continuous Wavelet Transform (CWT) versus the Semi-Analytical Finite Element Method (SAFEM)

  Abdelali YACOUBI, Ayoub JABIRI, Mustapha AZKOUR, Rachid MANDRY, Mhammed EL ALLAMI

  2024-05-21

  203–224
• Finite Element Modelling of Atomic Force Microscope Cantilever Beams with Uncertainty in Material and Dimensional Parameters

  Bin WANG, Xiao WU, Tat-Hean GAN, Alexis RUSINEK

  2014-12-19

  403–421
• Failure Analysis (Experimental and Numerical Approach) of Gas Turbine Generator Cooling Fan in Comparison between using 2types (14° and 19° Angle of Attack) of Blades

  Ali JAHANGIRI, Seyed Ebrahim Moussavi TORSHIZI, Seyed Majid Yadavar NIKRAVESH

  99–117
• Application of Discrete Wavelet Transformation to Defect Detection in Truss Structures with Rigidly Connected Bars

  Anna KNITTER-PIĄTKOWSKA, Michał Jan GUMINIAK, Maciej PRZYCHODZKI

  2016-02-24

  157–170
• Finite Element Analysis of Strain Non-Uniformity in Two Processes of Severe Plastic Deformation

  J. MACIEJEWSKI, H. KOPEĆ, H. PETRYK

  197–216
• On Computational Solution of the Dynamic and Static Behaviour of a Coupled Thermoelastic Timoshenko Beam

  Theddeus Tochukwu AKANO, Akintoye O. OYELADE

  2021-01-26

  43–61
• Static and Stability Analysis of Shells with Large Displacements and Finite Rotations

  J. Marcinowski

  373–393
• Multiscale Identification of Parameters of Inhomogeneous Materials by Means of Global Optimization Methods

  Witold BELUCH, Marcin HATŁAS

  2017-03-20

  19–24
• A Parametric Study of Higher-Mode Natural Frequencies of Composite Stiffened Cylindrical Shell With Cut-Out

  Puja BASU CHAUDHURI, Anirban MITRA, Sarmila SAHOO

  2023-01-26

  81–109
• Characterization of Dynamic Friction Factor for FEM Modeling of High Speed Process

  Jean-Jacques ARNOUX, Guy SUTTER, Gautier LIST

  205–213
• Material Nonlinear Analysis of Plane Structures Made of Cement Based Composite Materials Using the ANSYS System

  J. Pencik

  71–90
• Influence of Additive Manufacturing Technology on Mechanical Properties of Glass-Filled Fine Polyamide PA3200GF

  Paweł BAJERSKI, Ryszard PĘCHERSKI

  2017-03-20

  155–161
• Effects of Hole Perpendicularity Error on Load Distribution in Single-Lap Double-Bolt Composite Joints

  Rupeng LI, Ruiheng XIAO, Ende GE, Hang GAO, Yongjie BAO, Xueshu LIU

  2018-01-31

  3-19
• Comparison of Two Methods for Numerical Upscaling

  Marek KLIMCZAK, Witold CECOT

  2016-11-24

  385–392
• Multiobjective Optimization in Two-scale Thermoelastic Problems for Porous Solids

  Adam DŁUGOSZ, Tomasz SCHLIETER

  2016-11-25

  449–456
• Advancing Computational Approaches for Geometry Optimization of Steel Structures

  Artur LAX, Sławomir MILEWSKI

  2024-05-16

  159–202
• Numerical Investigation of Hurricane-Induced Failure of a Military Tent

  Krzysztof KOSIUCZENKO

  2023-07-04

  367–381
• Visco-Elastic Analysis of the Femur-Implant System by Using Finite Element Approach

  S. Piszczatowski, K. Skalski

  375–394
• Effects of Hole-Perpendicularity Error on Joint Stiffness of Single-Lap Double-Bolt Composite Joints

  Xueshu LIU, Yuxing YANG, Hang GAO, Yongjie BAO, Rupeng LI, Lei CHEN

  2017-06-26

  289–305
• Progressive Failure Modelling of Transverse Cracking in Cross-Ply Laminates with Double-Edge-Semicircular Notches

  C.J. Liu, A.H.J. Nijhof, L.J. Ernst, R. Marissen

  287–303
• Composite Sandwich Footbridge – Numerical ESL FEM Calculations vs. In Situ Measurements

  Mikołaj MIŚKIEWICZ, Jacek CHRÓŚCIELEWSKI, Bartosz SOBCZYK, Łukasz PYRZOWSKI

  2017-03-20

  77–82
• Numerical Evaluation of Delamination on Mode II in Glass Fiber Reinforced Composites

  M.R. KHOSHRAVAN, M. MONIR VAGHEFI

  55–-68
• Modelling Thermomechanical Response of a Diamond Particle in a Metallic Matrix

  Jan LACHOWSKI, Joanna BOROWIECKA-JAMROZEK

  2017-03-20

  105–112
• On Spatial vs Referential Isotropic Fourier’s Law in Finite Deformation Thermomechanics

  Balbina WCISŁO, Jerzy PAMIN, Lars ROSE, Andreas MENZEL

  2023-02-14

  111–140
• 2D FE Micromechanics Modelling of Honeycomb Core Sandwich Panels

  Charles BETTS, Jianguo LIN, Daniel BALINT, Anthony ATKINS

  187–203
• Analysis of Thin-Walled Bars With Open and Closed-Open Cross-Sections

  A. Garstecki, W. Kąkol, K. Rzeszut

  345–355
• Contact Between 3D Beams with Deformable Circular Cross-Sections – Numerical Verification

  Olga KAWA, Przemyslaw LITEWKA, Robert STUDZIŃSKI

  2018-08-27

  281–299
• Strength Analysis of Typical Koepe Pulley Constructions Applied in Mine Hoisting Installations

  Stanisław WOLNY, Bogusław ŁADECKI

  2017-08-10

  523–538
• Validation of Computational Models of Steel-Concrete Composite Beams

  Agnieszka PEŁKA-SAWENKO, Tomasz WRÓBLEWSKI, Maciej SZUMIGAŁA

  2016-02-24

  53–67
• Evaluation of Steel Clad Plate Weldability Using Ram Tensile Test Method

  Z. ZATORSKI

  229–238
• Three-Dimensional Analysis of Laminated Plates with Functionally Graded Layers by Two-Dimensional Numerical Model

  Piotr PLUCIŃSKI, Jan JAŚKOWIEC

  2020-01-02

  21–45
• Numerical Investigation of Pores Statistic Distribution Influence on Porous Material Mechanical Behaviour

  Danuta MIEDZIŃSKA

  2017-03-20

  89–95
• Theoretical and Numerical Study of the Flexural Behaviour of BFRP RC Beams

  Dawid PAWŁOWSKI, Maciej SZUMIGAŁA

  2016-02-24

  213–223
• Development of a Numerical Model of the 9 mm Parabellum FMJ Bullet Including Jacket Failure

  Ch. MARECHAL, F. BRESSON, G. HAUGOU

  263–272
• A Novel Heuristic Algorithm for Minimum Compliance Topology Optimization

  Bogdan BOCHENEK, Monika MAZUR

  2016-11-28

  541–546
• Bending of Fragmented Architraves Restored With Bolted Titanium Bars: a Numerical Analysis

  S. K. KOURKOULIS, E. GANNIARI-PAPAGEORGIOU

  159–180
• Simulations of thermal softening in large strain thermoplasticity

  Balbina WCISŁO

  2016-11-25

  563–572
• Analysis of Euler-Bernoulli Beams with Arbitrary Boundary Conditions on Winkler Foundation Using a B-Spline Collocation Method

  Amin GHANNADIASL, Mohsen Zare GOLMOGANY

  2017-08-03

  423–445
• An Investigation of TNT Equivalence of Hemispherical PE4 Charges

  Samuel E. RIGBY, Piotr W. SIELICKI

  2015-01-08

  423–435
• A Simple Single Specimen Method for Measuring the Fracture Surface Energy of Rubber Materials

  N. Ait Hocine, M. Na1t Abdelaziz

  29–45
• Isogeometric Approximation for Dynamics of Infinite String Using Difference Equation Method

  Jerzy RAKOWSKI, Przemyslaw WIELENTEJCZYK

  2016-02-24

  197–211
• Beam-Element Model of Bridge Truss Girders Regarding Joint Dimensions

  T. Łodygowski, W. Siekierski

  3–17
• Finite Timoshenko-Type Beam Element with a Crack

  M. Krawczuk

  1992-07-01

  229-248
• Modelowanie rozkładów naprężeń i przemieszczeń w otoczeniu wierzchołka karbu trójkątnego w płaskich zagadnieniach teorii sprężystości. Część II

  Andrzej SEWERYN

  377–395
• Dynamic buckling of non-sway imperfect rectangular steel frames

  I. G. RAFTOYIANNIS, A. N. KOUNADIS

  3–15
• Temperature Influence on Non-Linear Harmonic Vibrations of Plates Made of Viscoelastic Materials

  Przemysław LITEWKA, Roman LEWANDOWSKI

  2020-03-26

  159–176
• Numerical Simulation of Deflection and Stability of the Wooden Transmission Tower of Gliwice Radiostation

  Błażej WOJACZEK, Andrzej KATUNIN, Janusz BROL, Katarzyna ADAMCZYK

  2018-06-11

  229–247
• Relaxation of Process-Induced Stresses in Composite Parts – Mixed Experimental-Numerical Approach

  Anna Maria GALINSKA

  2018-04-19

  111–128
• Analysis of Non-stationary Heat Transfer in a Hollow Cylinder with Functionally Graded Material Properties Performed by Different Research Methods

  Martyna Paulina RABENDA

  2015-02-25

  329–339
• Response Surfaces in the Numerical Homogenization of Non-Linear Porous Materials

  Witold BELUCH, Marcin HATŁAS

  2019-05-02

  213–226
• An Experimentally Validated Model for the Ilizarov Fixator Considering the Loss of Wire’s Pretension

  Stavros K. KOURKOULIS, Athanasios MITOUSOUDIS

  2016-12-05

  621–627
• Retrofit Analysis of Florida Beam-and-Post Reinforced Concrete Bridge Barriers

  J.W. Wekezer, I. Kreja, M. Issa

  187–211
• Evaluation of Critical Static Loads of Three-Layered Annular Plate with Damaged Composite Facings

  Dorota PAWLUS

  2016-12-15

  613–619
• Finite-Element Model for Laminated Beam-Plates Composite Using Layervise Displacement Theory

  V.E. Rosca, V.F. Poteraşu, N. Ţăranu, B.G Rosca

  165–176
• Mechanical Behavior of Parallel Pipelines Under Foundation Pit Excavation

  Chuanjun HAN, Jun MA, Rui XIE, Jie ZHANG

  2018-03-12

  93–106
• Mechanical and Vibrational Analysis of Chicken Feather Hybrid Composites

  Chennakeshava RAMANATHAN, Supreeth SHIVAKUMAR, Mohan B. VANAROTTI, Puttaswamaiah SIDDAPPA

  2024-12-12
• Changes in Strength Properties of Torsion-Loaded Thin-Walled Channel Beam Caused by Constructional Modifications Introduced Based on Statical Analyses

  Ireneusz MARKIEWICZ

  2015-04-09

  203–214
• Sensitivity Analysis in a Fatigue Delamination Problem of an Elastic Two-Layer Composite

  Ł. FIGIEL, B. LAUKE, M. KAMIŃSKI

  65–87
• New Advances in the Machining of Hard Metals using Physics-Based Modeling

  Troy D. MARUSICH, Shuji USUI, Luis ZAMORANO, Kerry MARUSICH, Juergen LEOPOLD

  3-13
• Theoretical and Numerical Analyses of an Aluminium-Concrete Composite Beam with Channel Shear Connectors

  Łukasz POLUS, Maciej SZUMIGAŁA

  2019-08-02

  535–556
• The Static and Dynamic Compressive Behaviour of Selected Aluminium Alloys

  R. WINZER, A. GLINICKA

  85–100
• Three-Point Bending of a Beam with Non-Homogeneous Structure in the Depth Direction

  Krzysztof MAGNUCKI, Ewa MAGNUCKA-BLANDZI, Dawid WITKOWSKI, Leszek WITTENBECK

  2023-11-28

  645–665
• Crystallization Kinetics of Polyamide 2200 in the Modelling of Additive Manufacturing Processes by FE Analyses

  Pawel BAJERSKI, Ryszard Bolesław PĘCHERSKI, Damian CHUDY, Leszek JARECKI

  2019-07-29

  301–309
• Comparison of the Stiffness of 3D-Printed Wire Raceway Slewing Bearing Based on Simplified FEA Model and Experiment

  Dominik GUNIA, Tadeusz SMOLNICKI, Mariusz STAŃCO

  2023-08-24

  383–397
• FEM analysis in the hip joint reconstructed with classical and modified hip resurfacing

  Anna Maria RYNIEWICZ, Tomasz MADEJ

  2017-03-20

  123–131
• A Study of the Ballistic Limit of AA2024-T351 Sheets Impacted by Spherical and Cubical Compact Projectiles

  Tom DE VUYST, Rade VIGNJEVIC, Adrian AZORIN ALBERO, Kevin HUGHES, James C. CAMPBELL, Nenad DJORDJEVIC

  2016-08-16

  351-366
• Comparison Between Numerical Analysis and Actual Results for a Pull-Out Test

  Jakub GONTARZ, Jerzy PODGÓRSKI, Józef JONAK, Marek KALITA, Michał SIEGMUND

  2019-09-03

  311–331
• The Validation of Fe Modeling of Orthogonal Turning Process Using Cowper–Symonds Material Behavior Law

  Virginija GYLIENE, Vytautas OSTASEVICIUS

  2013-12-20

  249–263
• Analysis of Load-Capacity at Collapse of I-Section Thin-Walled Beam

  S. Gawłowski, R.B. Pęcherski

  2004-06-15

  5–22
• Modelling Elastic Behaviour of Soft Tissues. Part I. Isotropy

  S. Jemioło, J.J. Telega

  213–240
• Shape Optimization of the Muffler Shield with Regard to Strength Properties

  Joachim JAROSZ, Adam DŁUGOSZ

  2023-08-02

  351–366
• Deformation Zones in Granular Materials in Hoppers During Filling and Emptying Processes

  Z. Mróz, I. Sielamowicz

  2003-12-30

  461–491
• Numerical Modelling of Laboratory Test of Plain Concrete Under Uniaxial Impact Compression

  R. Adamczyk, T. Łodygowski

  2003-12-30

  381–398
• Influence of the Transverse Inhomogeneity on the Nonlinear Post-Buckling Path of Compressed FG Cylindrical Panels

  Olga LYKHACHOVA, Zbigniew KOŁAKOWSKI

  2017-12-20

  563–577
• The Use of Computed Tomography and Ultrasonic Imaging for Assessment of Defects in Plates Made of a Polyesteric Resin

  Daniela Ioana TUDOR, Stefan Dan PASTRAMA, Anton HADAR

  17-31
• Transient Vibration of Unsteady Linear Closed Loop Systems

  E. Wittbrodt, K.J. Kaliński

  247–268
• Comparison of Some Numerical Integration Methods for The Equations of Motion of Systems with a Finite Number of Degrees of Freedom

  Z. Kacprzyk, T. Lewiński

  1983-03-30

  213-240
• A Note on the Perturbation Approach to Nonlinear Static Analysis of Elastic Plane Trusses

  M. Saran, M. Kleiber

  1984-09-30

  315-327
• Mixed Finite Element Solution of Quasi-Static Problems of Viscoplastic Plates

  M.J. Mikkola, K. Saloviin

  1980-03-30

  139-152
• Finite Element Model for 3-D Analysis of Composite Plates

  M. Lefik

  1995-07-01

  225-244
• Changes in the Eigenpairs Due to the Structure Modification. The Continuous Approach

  M. Skrinar, A. Umek

  1997-07-01

  227-236
• Wyznaczanie naprężeń w konstrukcjach z technologiczną warstwą wierzchnią metodą elementów skończonych

  Zofia HANDZEL-POWIERŻA, Stanisław KUCHARSKI

  1990-12-28

  635–647
• 2-D And 3-D Analysis of Stochastic, Elastic Soil Medium

  J. Przewłócki, J. Górski

  173–181
• Finite Element Analysis of Elastic-plastic Plane Stress Problem

  I. Winnicki, M. Kleiber, M. Kwieciński

  1975-12-30

  609-624
• The Response of Orthotropic Steel Decks to Traffic Loads

  A.T. Dempsey, D.L. Keogh, B. Jacob, J. Carracilli

  309–327
• Multi-Scale Numerical Analysis of the Effect of Microstructural Features on the Mechanical Behavior of Polycrystalline Ti-6Al-4V Alloy

  Fatna BENMESSAOUD, Vincent VELAY, Mohammed CHEIKH, Vanessa VIDAL, Christine BOHER, Farhad RÉZAÏ-ARIA

  2019-06-28

  227–242
• The Use of Transitional Elements for Stress Analysis of Structures with a Technological Surface Layer by the Method of Finite Elements

  S. Kucharski

  1994-07-01

  19-31
• Nonlinear Finite Element Analysis of Bone-Cement Interface Condition in Cemented Total Hip Replacement

  P. Colombi, L. Sgambi

  99–115
• Delayed-Damage Modelling for Fracture Prediction of Laminated Composites under Dynamic Loading

  O. Allix, J.-F. Deü

  29–46
• Torsion of a Saint-Venant Cylinder with a Non-Simply Connected Cross-Section

  T.F. Jabłoński, U. Andreaus

  77–91
• Dynamic Calculation of the Youth Bridge Over the Danube River in Bratislava

  J. Melcer

  1995-07-31

  259-277
• Numerical Modelling of Adiabatic Shear Bad Formation in a Twisting Test

  A. Glema, W. Kąkol, T. Łodygowski

  1997-12-01

  419-431
• Finite Element Analysis of Heat Flow in Friction Welding

  M. Kleiber, A. Służalec

  1984-03-30

  107-113
• Numerical Simulation of Masonry Panels

  N.M. Auciello, A. Ercolano

  1997-12-01

  375-394
• Magnetorheological Rotary Brake: Analysis, Design Considerations and Experimental Evaluation

  Bogdan Sapiński, Sławomir Bydoń

  2006-09-15

  233–247
• Creep Effects in the Finite Element Analysis of Thermo-Mechanical Problems

  T. Niezgoda

  1992-10-01

  375-386
• A Fuzzy-Set Approach to Buckling Analysis of Composite Structures

  Piotr Zenon Kędziora

  2006-03-15

  71--84
• Modelowanie rozkładów naprężeń i przemieszczeń w otoczeniu wierzchołka karbu trójkątnego w płaskich zagadnieniach teorii sprężystości. Część I

  Andrzej SEWERYN

  1990-12-28

  351–375
• The Fast Crack Growth Analysis Under Dynamic Loading with the Help of Adina

  L.V. Rokach, A. Neimitz

  1994-12-31

  339-358
• Stateczności Elementów Sprężonych przez Uzwojenie

  C. Eimer

  1956-12-30

  545-564
• Numerical Analysis of Compatible Finite Elements of Different Order in Two-Dimensional Problems of Elasticity

  F. Braga, G. Rega, F. Vestroni

  1978-12-30

  619-643
• Zginanie i wyboczenie ustrojów sprężystych, złożonych z prętów prostych o zmiennych przekrojach poprzecznych z uwzględnieniem ciężaru własnego

  Z. Mazurkiewicz

  1968-09-30

  411-438
• Analysis of Dynamic Interaction Between the Continuous String and Moving Oscillator

  R. Bogacz, T. Szolc

  1993-12-31

  361-380
• Determination of Drying Induced Stresses in a Prismatic Bar

  A. Rybicki

  1993-07-01

  139-156
• From the Editorial Board

  Reviewers 2015

  2015-10-27

  510
• Physically and Geometrically Nonlinear Analysis of Structures Using One- and Two-Dimensional Finite Elements

  K. Dems, M. Kleiber

  1976-12-30

  771-786
• Numerical Analysis of Thermo-Elasto-Plastic Problems

  M. Kleiber, T. Niezgoda

  1988-12-31

  645-660
• Some Results in the Numerical Analysis of Structural Instabilities Part II. Dynamics

  M. Kleiber

  1982-12-30

  355-367
• Some Results in the Numerical Analysis of Structural Instabilities Part I. Statics

  M. Kleiber

  1982-12-30

  327-353
• Nieliniowa analiza pełzania wstępnie sprężonych konstrukcji betonowych

  Wiesław WOJEWÓDZKI, Aleksiej PIETROW

  1990-12-28

  487–506
• Rail on Linear Stochastics Supports

  M. Moravčík

  1995-07-01

  279-296
• Numerical Interpretations of Creep Buckling Behavior 
of Columns

  J. Walczak, J. Zacharzewski

  1982-03-30

  3-19
• Asymptotyczne metody obliczania współczynników intensywności naprężeń dla karbów trójkątnych w płaskich zagadnieniach teorii sprężystości

  Andrzej SEWERYN

  1990-12-28

  467–486
• Non-Unique Numerical Solutions in Visco-Plasticity

  H.J. Antúnez

  1992-12-31

  525-536
• Shape Optimization of 2D Elastic Structures Using Adaptne Grids

  W. Gutkowski, J. Zawidzka

  1995-07-01

  137-150
• Finite Element Applications to Evaluate the Stress and Strain Field in the Vicinity of an Imperfection in Thin Shells

  S. Karpiński

  1995-12-31

  545-552
• Transient Nonlinear Response of Impulsively-Loaded Circular Plates

  M.T.E. Tuomala, M.J. Mikkola

  1981-03-30

  131-142
• Wyboczenie Kopul Kulistych w Świetle Badań Modelowych

  A. Lisowski

  1957-03-30

  99-116
• The Problem of Bending of Fibre Composite Viscoelastic Plates

  M. Olejniczak

  1995-12-31

  505-526